Examples

This section contains a list of example python programs demonstrating the use cases of NeST.

The source code for all the below examples can be found here

List of all examples

• NeST Examples
• Basic examples to get started with NeST
  • 1. point-to-point-1.py
  • 2. point-to-point-2.py
  • 3. point-to-point-3.py
  • 4. simple-lan.py
  • 5. two-lans-connected-directly.py
  • 6. two-lans-connected-via-router.py
• Examples to demonstrate the usage of config options in NeST
  • 1. config-1-point-to-point-1.py
  • 2. config-2-point-to-point-1.py
  • 3. config-3-point-to-point-1.py
  • 4. config-4-point-to-point-1.py
• Examples to understand the support of IPv6 addressing in NeST
  • 1. ipv6-point-to-point-1.py
  • 2. ipv6-point-to-point-2.py
  • 3. ipv6-point-to-point-3.py
  • 4. ipv6-simple-lan.py
  • 5. ipv6-two-lans-connected-directly.py
  • 6. ipv6-two-lans-connected-via-router.py
  • 7. ipv6-v4-point-to-point-3.py
• Examples to demonstrate the usage of Address Helpers in NeST
  • 1. ah-point-to-point-1.py
  • 2. ah-point-to-point-2.py
  • 3. ah-point-to-point-3.py
  • 4. ah-simple-lan.py
  • 5. ah-two-lans-connected-directly.py
  • 6. ah-two-lans-connected-via-router.py
  • 7. ipv6-ah-point-to-point-1.py
  • 8. ipv6-ah-point-to-point-2.py
  • 9. ipv6-ah-point-to-point-3.py
  • 10. ipv6-ah-simple-lan.py
  • 11. ipv6-ah-two-lans-connected-directly.py
• Examples to show different packet level operations supported in NeST
  • 1. packet-capture-point-to-point-3-tcpdump.py
  • 2. packet-capture-point-to-point-3-tshark.py
  • 3. packet-corruption-point-to-point-3.py
  • 4. packet-delay-distribution-point-to-point-3.py
  • 5. packet-duplication-point-to-point-3.py
  • 6. packet-loss-gemodel-point-to-point-3.py
  • 7. packet-ping-preload-point-to-point-3.py
  • 8. packet-loss-state-point-to-point-3.py
  • 9. packet-ping-preload-point-to-point-3.py
  • 10. packet-reordering-point-to-point-3.py
• Examples to demonstrate how to generate UDP traffic in NeST
  • 1. udp-point-to-point-3.py
  • 2. udp-simple-lan.py
  • 3. udp-set-server-options.py
• Examples to demonstrate how to generate TCP traffic in NeST
  • 1. dctcp-point-to-point-3.py
  • 2. tcp-bbr-point-to-point-3.py
  • 3. tcp-cubic-parameters-point-to-point-3.py
  • 4. tcp-cubic-point-to-point-3.py
  • 5. tcp-cubic-ssr-point-to-point-3.py
  • 6. tcp-cubic-tfo-point-to-point-3.py
  • 7. tcp-cubic-wnd-scale-point-to-point-3.py
  • 8. tcp-offloads-point-to-point.py
  • 9. tcp-reno-point-to-point-3.py
  • 10. tcp-udp-point-to-point.py
• Examples to demonstrate how to configure queue disciplines (qdiscs) using NeST
  • 1. choke-point-to-point.py
  • 2. codel-point-to-point.py
  • 3. fq-codel-point-to-point.py
  • 4. fq-pie-point-to-point.py
  • 5. pfifo-point-to-point.py
  • 6. pie-point-to-point.py
  • 7. red-point-to-point.py
• Examples to demonstrate the support of routing in NeST
  • Examples to demonstrate the usage of Free Range Routing (FRR) Suite in NeST
    • 1. frr-isis-point-to-point-2.py
    • 2. frr-isis-point-to-point-3.py
    • 3. frr-ospf-point-to-point-2.py
    • 4. frr-ospf-point-to-point-3.py
    • 5. frr-rip-point-to-point-2.py
    • 6. frr-rip-point-to-point-3.py
    • 7. frr-rip-point-to-point-multi-address.py
  • Examples to understand the support of MPLS in NeST
    • 1. mpls-basic-ce-pe-routers.py
    • 2. mpls-ce-pe-p-routers.py
    • 3. mpls-ldp-ce-pe-p-routers.py
    • 4. mpls-ldp-ce-pe-p-routers-multi-address.py
  • Examples to demonstrate the usage of Quagga Routing Suite in NeST
    • 1. quagga-isis-point-to-point-2.py
    • 2. quagga-isis-point-to-point-3.py
    • 3. quagga-ospf-point-to-point-2.py
    • 4. quagga-ospf-point-to-point-3.py
    • 5. quagga-rip-point-to-point-2.py
    • 6. quagga-rip-point-to-point-3.py
    • 7. quagga-rip-point-to-point-multi-address.py
  • Examples to demonstrate the support of static routing in NeST
    • 1. static-routing-point-to-point-2.py
    • 2. static-routing-point-to-point-3.py
  • Examples to show the use of BIRD Internet Routing Daemon (BIRD) Suite in NeST
    • 1. bird-ospf-point-to-point-2.py
    • 2. bird-ospf-point-to-point-3.py
    • 3. bird-rip-point-to-point-2.py
    • 4. bird-rip-point-to-point-3.py
• Examples to demonstrate how to stream videos using MPEG DASH in NeST
  • 1. mpeg-dash-point-to-point-1.py
  • 2. mpeg-dash-two-lans-connected-via-router.py